Using "New Target Warning" Dialog Box In The [Alert] Menu - JRC JMR-7230-S3 Instruction Manual

Auto acquisition/activation zone (AZ) is set up using the following three methods.
(1) Use the "New Target Warning" dialog in the [Alert] menu.
(2) Use the cursor.
(3) Use the EBL/VRM dial.

6.5.2.1 Using "New Target Warning" dialog box in the [Alert] menu

1
Click on the [Menu] button on the left toolbar.
The menu is displayed.
2
Click [Alert] - [New Target Alarm] on the menu.
The "New Target Alarm" dialog is displayed.
3
To set up AZ1, select the [Use AZ1] check box. To set up AZ2, select the [Use AZ2]
check box.
4
To set up [Use AZ1], click on the [1] tab. To set up [Use AZ2], click on the [2] tab.
Their respective setting items are displayed.
5
Enter the start angle, end angle, start distance and end distance of AZ.
Start angle
End angle
Start distance
End distance
6-21
Section 6 Target Tracking and AIS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27