JRC JMR-7230-S3 Instruction Manual page 118

The following dialog box appears when the transmission of a message completes.
8
Click on the [OK] button to close the dialog box.
9
To save an MMSI code and a typed message in the case of MMSI transmission, click on
the [Save] button.
10
Click on the [x] button to close the dialog box.
To send a message by specifying an MMSI code:
1
Click on the [Addressed MMSI] (specified MMSI code) button.
2
Type an MMSI code (9 digits) in the [MMSI] input box.
The name of the ship having the entered MMSI code is displayed in the [Name] box.
The identification number is displayed in the [Target ID] box.
3
Type a message in the message input area.
In the case of a safety related message: Maximum 156 characters
In the case of a routine message:
To distribute a broadcast message:
1
Click on the [Broadcast] button.
2
Type a message in the message input area.
In the case of a safety related message: Maximum 161 characters
In the case of a routine message:
Section 6 Target Tracking and AIS
Maximum 151 characters
Maximum 156 characters
6-64