Table of Contents
Advertisement
Bodypack
Insert batteries and attach antenna. Turn on using the volume knob. The battery light illuminates.
Scan and Sync
1. On the bodypack, press the scan button. The display flashes SYNC NOW....
2. Align the IR windows on the bodypack and rack unit and press the sync button. The rack unit Level LEDs flash,
and it displays SYNC SUCCESS.
3. Turn the RF switch on. The blue RF LED illuminates on the bodypack to indicate that it is detecting the trans-
mitter. The bodypack also displays the RF signal strength (RF).
4. Important: Turn bodypack volume down before plugging in earphones.
5. Insert the earphones and slowly turn up the volume.
Shure Incorporated
7/30
Advertisement
Table of Contents
