Table of Contents
Advertisement
Equipment, Tools, and Connections
Equipment, Tools, and Connections
This section describes the equipment, tools, and connections necessary for installing your Cisco 807 ISR. It
contains the following topics:
Items Shipped with your Router
Unpack the box and verify that all items listed on the invoice were shipped with the Cisco 807 ISR.
The following items are shipped with your router:
• IR807 Printed Document Of Compliance
• Grounding Lug Kit
• Power Connector
Additional Items
The following items are not shipped with the router but are required for installation:
• Screws for mounting the router on a wall.
• Wire crimper for chassis grounding.
• Wire for connecting the chassis to an earth ground.
• Ethernet cables for connecting devices to the Ethernet ports.
• Ratcheting torque flathead screwdriver that exerts up to 15 in-lb (1.69 N-m) of pressure.
• A number-2 Phillips screwdriver.
Ethernet Devices
Identify the Ethernet devices that you will connect to the router: hub, servers, and workstations or PCs. Ensure
that each device has a network interface card (NIC) for connecting to Ethernet ports.
Installing the Router
This section describes how to install the Cisco 807 ISR. This router can be installed on a table top or other
flat horizontal surface, mounted on a wall, or DIN rail.
The recommended clearance when horizontally mounted is 1 inch on non-connector sides and 2 inches on
bottom. Stacking heat-dissipating objects on top of the router is not allowed. I/O side clearance is needed as
it is required to access the cable connections.
Clearance is required to attach, mount the DIN rail bracket, and Wall mount bracket. The same clearances
apply when mounted vertically.
This section also describes how to attach external antennas to the routers and contains the following topics:
Warnings
WARNING: For NEC-compliant grounding, use size 14 AWG (1.6mm) or larger copper wire and a ring
terminal with an inner diameter of 1/4 in. (5 to 7 mm).
Cisco IR807 Industrial Integrated Services Router Hardware Installation Guide
26
Installing the Router
Advertisement
Table of Contents
