Enable/Disable Temperature Inputs - Phonetics Sensaphone 4100 User Manual

3. Using the number keys, enter the value for the high temperature limit
The 4100 will recite the digits as they are pressed.
4. Press ENTER. The 4100 will say "Enter."
To program the low temperature limit:
1. Press the SET key
2. Press the LOW TEMP key
The 4100 will say "Enter low temperature limit."
3. Using the number keys, enter the value for the low temperature limit
The 4100 will recite the digits as they are pressed.
4. Press ENTER. The 4100 will say "Enter."
NOTE: Do not set the limits too close the normal room temperature. Minor changes in
temperature would cause frequent and unnecessary alarm dialouts.
To interrogate the temperature limits:
1. Press the WHAT IS key
2. Press the HIGH TEMP key to check the high temperature limit. Press the LOW
TEMP key to check the low temperature limit.
If the high or low temperature alarm is enabled (see below), the 4100 will recite the
programmed limit in degrees. If the high or low temperature alarm is disabled, the 4100 will
say "Off " and then recite the programmed limit in degrees.

ENABLE/DISABLE TEMPERATURE INPUTS

This feature allows you to enable or disable the dialout for the high and low temperature
alarms. When a high or low temperature alarm is enabled, it will cause a dialout for an
alarm. When a high or low temperature alarm is disabled, it will not cause a dialout. The
default is enabled (on).
To enable/disable the high temperature alarm:
1. Press the SENSOR ON/OFF key
2. Press the HIGH TEMP key
(enter value)
(enter value)
(or)
Chapter 4: Alarm Programming
31