Table of Contents
Advertisement
Sensaphone Model 4100 Instruction Manual
To incorporate a pound or asterisk tone:
1. Press the SET key
2. Press the number key (1-4) of the Phone number
3. Press the TONE key (if applicable)
The 4100 will beep.
4. Enter the Phone number using the number keys
The 4100 will recite the digits as you press them.
4.1. Position the pound or asterisk tone within the Phone number where required
by pressing the SET or WHAT IS key. The 4100 will beep.
4.2. Enter the remaining digits of the Phone numbers (if any).
5. Press ENTER. The 4100 will say "Enter."
NOTE: Each pause, pound (#) or asterisk (*) tone is counted as one digit toward the
total of 32 digits allowed.
Below is an example of a dialout phone number calling to a beeper. Note that more than one
pause may be needed. It is advisable to test a phone number dialing to a beeper more than
once.
Beeper example:
RINGS UNTIL ANSWER & TAD COMPATIBILITY
The rings until answer is the number of rings that must occur before the Model 4100
answers the phone when you call in for a status report. This value can be from 1 to 79. The
default value is 4.
To program rings until answer:
1. Press the SET key
2. Press the RINGS key
3. Using the number keys, enter a value
The 4100 will recite the digits as you press them
4. Press ENTER. The 4100 will say "Enter."
22
(phone number)
(phone number)
(enter value)
or
(remaining number)
(Sensaphone's phone
number 4-digit code)
Advertisement
Table of Contents
