Control Panel - Piazzetta P962 Instructions For Installation, Use And Maintenance Manual

Action
In the event of a brief interruption of the electrical current
while the stove is in operation, the stove will restart
automatically.
• The grate cleaning phase activates.
• The fan operates at full speed to allow the stove to cool.
• The readout "PUL" appears in the STOVE STATUS mode.
See the section on programming.
• The automatic stove restart cycle begins (functions
detailed in 'STARTUP' activate automatically).
• Once the ignition cycle has been completed the stove
operates normally at power level 2.
• The stove will continue operating normally at power level 2.
6.5 CONTROL PANEL - Fig. 60
The stove is fitted with a digital control panel to operate stove functions
when the LCD remote control is unavailable. The various functions of
the control panel are listed below.
NUMBER KEY / DISPLAY
1 KEY 1 ON/OFF
2 LED 2 ON/OFF LED
3 KEY 3 INCREASE POWER
4 LED 4 INCREASE POWER LED The LED lights up when the power-increase key is pressed and indicates that the power has been increased.
5 KEY 5 DECREASE POWER
6 LED 4 DECREASE POWER LED The LED lights up when the power-decrease key is pressed and indicates that the power has been decreased.
7 LED 7 SAFETY DEVICE
8 LED 8 RADIO SIGNAL EMISSION The led lights up when the stove receives data from the remote control.
All manuals and user guides at all-guides.com
INTERRUPTION OF POWER SUPPLY
Function
DESCRIPTION
Allows you to start up or shut down the product manually.
If the LED lights up, it indicates that the stove is lit.
Allows you to increase the power setting. You can choose between the two available settings, P1-
P3. The Multifuoco fan has a default setting for each of the two power settings.
Allows you to decrease the power setting. You can choose between the two available settings, P1-
P3. The Multifuoco fan has a default setting for each of the two power settings.
If the LED lights up, it indicates that a safety device has activated. After approx. 60 seconds the
alarm signal will sound (if activated). In the event of activation proceed as follows:
• turn off the stove by pressing the ON/OFF key for several seconds;
• the alarm signal will stop;
• wait until you are sure that combustion of any pellets left in the grate has ceased;
• wait for the stove to cool, then check for and remove whatever has activated the safety device.
Finally, after having cleaned the grate, restart the stove by pressing the ON/OFF key.
!
C L E A N I N G
1 2 : 0 0 2 2
1
Fig. 60
2
8
7
4
6
Display
!
.
c
DT2040061-04
DT2010222-07
1
3
3
2
5
1
DT2030332-00
USE 27