Lighting For The First Time; Startup And Normal Operation - Piazzetta P962 Instructions For Installation, Use And Maintenance Manual

NUMBER KEY / DISPLAY
1 Key ON/OFF
2 Key STAND-BY
3 Key POWER
4 Key FAN SPEED
5 Key SELECT
6 Key TEMPERATURE
7 Key TIMER
8 Key MENU
9 Key SET
10 Key MENU SELECTION
11 Key ESC
12 Key OPT
13 Display
14 Display POWER
15 Display MULTIFUOCO
16 Display DAYS OF THE WEEK
17 Display RADIO SIGNAL EMISSION
18 Display TIMER
19 Display SAFETY
20 Display FLAT BATTERY

6.3 LIGHTING FOR THE FIRST TIME

• Before lighting the stove check that the grate is pushed back towards the baffle plate.
• When lighting the stove for the first time or when it has not been used for some time, it is advisable not to operate the stove at full power
immediately. For the first few days, operation at medium power is recommended to allow all materials and mechanical parts to settle. Upon first
ignition certain odours may be given off due to the evaporation of paint or grease. To alleviate the problem just air the room. Do not remain in
the room when there are odours, as the fumes may be harmful to people or pets.
• When the pellet hopper is loaded for the first time the loading auger has to fill up; during this period the pellets will not be fed into the firebox.
6.4 STARTUP AND NORMAL OPERATION - Fig. 59
• Before proceeding with lighting the stove:
Ensure that the hearth door is well closed.
• Check that the pellet hopper is full or at least contains enough pellets for
the stove to run for the desired period.
• When the stove is connected to the power supply but is not yet lit, the
display will show the readout OFF and in the lower half the current time,
the measured temperature and the previously set power and fan settings.
All manuals and user guides at all-guides.com
DESCRIPTION
Allows you to start up or shut down the stove.
Pressing the stand-by key and holding it down (for around 5 seconds) until KEYPAD BLOCKED
appears on the display will disable the keypad. To re-enable the keypad press the stand-by key
and hold it down (for around 8 seconds) until KEYPAD UNBLOCKED appears on the display.
Allows you to select the power setting. With the SELECT key you can choose between the five
available settings, P1-P2-P3-P4-P5.
Allows you to choose the speed setting on the Multifuoco fan. With the SELECT key you can choose
between the four available settings, 1-2-3-4.
Allows you to choose:
Allows you to set the room temperature. The SELECT key will allow you to choose the desired
temperature between 7°C and 30°C.
Displays the current date and time.
Allows:
Confirm MENU selected
Scrolls through the programming MENU
Returns to previous menu
Displays the MULTICOMFORT temperatures. The dash before the temperature shows which sensor
is giving the temperature reading.
Shows on three lines the function settings, the current time and the temperature.
Shows the power setting selected, P1-P2-P3-P4-P5.
Shows the Multifuoco setting selected, 1-2-3-4.
The two lines of squares to the left and to the right show respectively the left or right fan.
Shows the day of the week, 1 Monday, 2 Tuesday, 3 Wednesday, 4 Thursday, 5 Friday, 6 Saturday,
7 Sunday.
Active if the remote is receiving data from the stove
Shows that the timer is engaged
Symbol appears when the safety system is activated
Shows that the battery is flat
• power level - having previously pressed the POWER key
• fan speed - having previously pressed the FAN SPEED key
• temperature - having previously selected the TEMPERATURE key
• access to the programming menu
• return to the initial display
Fig. 59
!
!
O F F
0 9 : 5 3
1
DT2010082-03
DT2010221-05
.
c
2 0
USE 23