Interface Connections; Lcd Module - Advantech IDK-1121WP Series User Manual

2.3

Interface Connections

2.3.1

LCD Module

 LCD Connector (CN1) : IS100-L30O-C23 (UJU) , GT103-30S-HF15 (LSM),
GT103-30S-HF15-M (LSM)
 Mating Connector : FI-X30C2L (Manufactured by JAE) or Equivalent
Table 2.3: MODULE CONNECTOR(CN1) PIN CONFIGURATION
No Symbol
1 FR0M
2 FR0P
3 FR1M
4 FR1P
5 FR2M
6 FR2P
7 GND
8 FCLKINM Minus signal of odd clock
9 FCLKINP Plus signal of odd clock
10 FR3M
11 FR3P
12 SR0M
13 SR0P
14 GND
15 SR1M
Note! 1.
2.
3.
4.
5.
IDK-1121WP User Manual
Description
Minus signal of odd channel
0 (LVDS)
Plus signal of odd channel 0
(LVDS)
Minus signal of odd channel
1 (LVDS)
Plus signal of odd channel 1
(LVDS)
Minus signal of odd channel
2 (LVDS)
Plus signal of odd channel 2
(LVDS)
Ground
channel (LVDS)
channel (LVDS)
Minus signal of odd channel
3 (LVDS)
Plus signal of odd channel 3
(LVDS)
Minus signal of even chan-
nel 0 (LVDS)
Plus signal of even channel
0 (LVDS)
Ground
Minus signal of even chan-
nel 1 (LVDS)
All GND (ground) pins should be connected together and to Vss
which should also be connected to the LCD's metal frame.
All VLCD (power input) pins should be connected together.
Input Level of LVDS signal is based on the IEA 664 Standard.
Always make sure LVDS signal and clock inputs should be 4 chan-
nels and synchronized.
Basically Panels cannot support "Interlaced Scan Method" and
ITLC is Interlace Image Sticking Reduction Mode selection pin.
(L: Normal Mode, H: Interlace Image Sticking Reduction Mode)
If you don't use this pin, it should be connected to GND.
(Low level Input Voltage : GND ~ 0.4V, High level Input Voltage :
1.6 ~ 3.6V)
No Symbol Symbol
16 SR1P Plus signal of even channel 1
(LVDS)
17 GND Ground
18 SR2M Minus signal of even channel
2 (LVDS)
19 SR2P Plus signal of even channel 2
(LVDS)
20 SCLKINM Minus signal of even clock
channel (LVDS)
21 SCLKINP Plus signal of even clock
channel (LVDS)
22 SR3M Minus signal o f even channel
3 (LVDS)
23 SR3P Plus signal of even channel 3
(LVDS)
24 GND Ground
25 NC No Connection (I2C Serial
interface for LCM)
26 NC No Connection.(I2C Serial
interface for LCM)
27 ITLC Interlace mode selection
28 VLCD Power Supply +5.0V
29 VLCD Power Supply +5.0V
30 VLCD Power Supply +5.0V
10