Industrial flat panel monitor with 19" lcd in vga/video (32 pages)
Summary of Contents for Advantech IDS-3112 Series
Page 1
User Manual IDS-3112 Series 12.1" Industrial Open Frame Monitor...
Page 2
No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd. Information provided in this manual is intended to be accurate and reliable. How- ever, Advantech Co., Ltd.
Page 3
Class I, Division 2, Groups A, B, C and D indoor hazards. Technical Support and Assistance Visit the Advantech website at http://support.advantech.com where you can find the latest information about the product. Contact your distributor, sales representative, or Advantech's customer service center for technical support if you need additional assistance.
Page 4
Warnings, Cautions and Notes Warning! Warnings indicate conditions, which if not observed, can cause personal injury! Caution! Cautions are included to help you avoid damaging hardware or losing data. e.g. There is a danger of a new battery exploding if it is incorrectly installed. Do not attempt to recharge, force open, or heat the battery.
Page 5
The sound pressure level at the operator's position according to IEC 704-1:1982 is no more than 70 dB (A). DISCLAIMER: This set of instructions is given according to IEC 704-1. Advantech disclaims all responsibility for the accuracy of any statements contained herein.
Introduction The Advantech IDS-3112 series is a brand new Industrial Open Frame Monitor, designed to meet the needs of customers who want quick and easy integration with Advantech Embedded Box Computers, such as ARK and DSA lines. Advantech offers different versions and resolutions of IDS-3112 to meet different demands: IDS-...
Specifications Note! The IDS-3112 series offers the following features and meets precise specifications. Unless otherwise noted, all the information listed below is subject to change without prior notification. Table 2.1: Specifications Model IDS- 3112 (XGA) IDS-3112 (SVGA) IDS-3112E (SVGA) Size 12.1"...
Page 15
Table 2.1: Specifications VGA x 1; DVI-D x VGA x 1; DVI-D x VGA x 1; 12 VDC 1; 12 VDC Jack x 1; 12 VDC Jack x Jack x 1; USB x1; 1;USB x1; RS-232 1;USB x1; RS-232 RS-232 x 1(USB & x 1 (USB &...
Rear Mount Assembly SOP Use the M3 screws to attach as shown in below. Cable Clamp A cable clamp also comes with Open Frame Monitor to fix the power cable, see picture below. Cable Clamp with IDS-3112 IDS-3112 User Manual...
A cable tie for the USB cable is included in the accessory box, see below: Packing List 1 x VGA cable 15P(M) 1.8 meter 1 x USB-A(M)/USB-A(M) 1.8 meter 4 x panel-mount clamps 4 x Panel-mount clamper screws: M4_25L ...
OSD Functions (IDS-3112 Series) The OSD of the IDS-3112 display (1024 x 768 and 800 x 600 resolution) was selected to illustrate examples below: Buttons Description Power Turn the monitor power ON or OFF Menu Activate the OSD menu Exit menu...
OSD Functions for IDS-3112E Series 3.2.1 OSD Main Menu: Push the MENU Key 3.2.2 OSD Lock Press the "Right" key and "Menu" key simultaneously to lock the OSD key. 3.2.3 OSD Unlock Press the "Right" key and "Menu" key simultaneously again to unlock the OSD key. IDS-3112 User Manual...
3.2.10 Reset Adjustment Touch Drivers The T/S driver CD-ROM is in the accessory box and comes with the product. It is also available online at the Advantech website as follows: http://support.advantech.com/support/default.aspx IDS-3112 User Manual...
If you experience trouble with your monitor, or it fails to operate correctly, please refer to the following instructions before calling the Advantech service center. If you are unable to correct the faults using the instructions below, then please contact the dis- tributor or a services/repair center.