Password Settings - HMS Anybus Modbus-TCP/RTU Gateway User Manual

Register Name
28 Number of stop bits
29 Slave time out time
30 Physical interface
Authentication
31 Valid IP address 1
32 Valid IP address 2
33 Valid IP address 3
34 Valid IP address 4
35 Mask for Valid IP address 1
36 Mask for Valid IP address 2
37 Mask for Valid IP address 3
38 Mask for Valid IP address 4
Valid commands:
Command Name
3 Read Holding Registers
6 Preset Single Register
16 Preset Multiple Registers

Password Settings

Choosing "Admin" will allow you to change the administrator password for the device.
Anybus® Modbus-TCP/RTU Gateway
Doc.Rev. 2.03
Values Options
1 - 2
25 - 65535 ms
0 - 2
0 EIA-485
(Screw termi-
nal block)
1 EIA-232
(DSUB)
2 EIA-232
(Screw termi-
nal block)
0 - 255
0 Disabled
1 - 255 Enabled
0 - 255 Enabled
0 - 255 Enabled
0 - 255 Enabled
0 - 255 Enabled
0 - 255 Enabled
0 - 255 Enabled
0 - 255 Enabled
Configuration 2-8
Comment
Default: 1 stop bit
Default: 1000 ms
Default
First byte of IP address
IP address authentication disabled
Second byte of IP address
Third byte of IP address
Fourth byte of IP address
First byte of mask
Second byte of mask
Third byte of mask
Fourth byte of mask
Doc.Id. HMSI-168-77