Radio - Connecting And Starting Up; General Notes On Use - Hama DIT1000MBT Operating Instructions Manual

5.2 Radio – Connecting and starting up
Connect the network cable to a properly installed and
easily accessible network socket. The power supply
unit is suitable for mains voltages between 100 and
240 V, and is thus operable on almost any AC power
grid. Please note that a country-specific adapter may
be necessary.You can find an appropriate selection of
Hama products at www.hama.com.
Note
• Only connect the product to a socket that has been
approved for the device.
• When using a mult-socket power strip, make sure
that the sum power draw of all the connected devices
does not exceed its maximum throughput rating.
• The electrical socket must always be easily accessible.
• If you will not be using the product for a long period
of time, disconnect it from mains power.
Once the product has been connected to mains power,
initialisation takes place.
The radio starts up.
To assist you in fi st-time setup of the radio,
a Setup Wizard is provided.

5.3. General notes on use

Notes on use
• These operating instructions always relate to
operation with the remote control. Functions that are
only usable by app are explained separately.
• When a selection among menu items is to be made
(such as YES or NO), the one currently selected has a
light-coloured background fill.
• In menus offering a variety of different options
(such as Equalizer, Update, and so on), the currently
selected option is marked with an asterisk (*).
Volume adjustment / mute
• Press [Lautstärke-tasten +/-] to increase/decrease
the volume.
] on the remote control to mute the radio.
• Press [
• Press [ ] again to reset the volume to the value it
was at prior to the radio being muted.
Entering passwords, search terms, and so on
• Select each successive letter and digit by turning
[▲], [▼], [►] and [◄] and confirm each
selection by pressing OK.
• To make corrections, select BKSP and confirm.
The last input made is deleted.
• To cancel input, select CANCEL and confirm.
• Once your input is complete, select OK and
confirm to finish.
• Press [INFO] to jump directly to the BKSP/
OK/ CANCEL fields.
Additional information
Press [INFO] to display context-dependent additional
information. The information shown depends on the
operating mode as well as the current selection of radio
station, music file,etc.
• Description
Indicates the radio station, the current program,
contents, subjects, etc.
• Program Genre/country
Indicates the Genre (music style) and the country or
region of the station.
• Reliability
• Bit-Rate
The currently received digital bit rate of the received
station is displayed.
• Codec
Specifies the encoding scheme used to digitise the data
or signal (such as MP3 or WMA).
9
[INFO]