Creating/Managing Multi-Room Groups - Hama DIT1000MBT Operating Instructions Manual

1 Open the home page (all audio systems)
Selection of the various sources (dependent
2
on the active device/the devices in the group)
Open the favourites list (storing and selecting
3
favourites)
4 Share current station
5 Volume control for the group or active device
Advanced settings (equaliser/date/factory
6
settings, dependent on the device)
7 Switch device/group to standby
8 Browse current source
9 Playback screen of the device/group
Display the function buttons (Play, Next,
10
Previous), dependent on the source
Volume control for the individual devices
11
of a multi-room group

16.4 Creating/managing multi-room groups

If there are several multi-room-enabled devices in your
network, they will appear in the selection list with a +
symbol after their name. The device that you have selected
in the list by tapping the
the group has been created. This means that audio being
played on the master is continued in the group. Once
you have tapped the icon, a screen appears in which all
compatible devices are listed. Tap each of the devices
you would like to have in the group, and confirm your
selection with Done.
In this window, you can also delete an existing group
and thereby dissolve it, or give the group a new name.
(See Figure 3 – Group name)
Please note that it is sufficient if one device in the group
supports a source such as Spotify, Bluetooth* or CD, and
can share it with the other devices in the group.
* When playing audio via Bluetooth, the source
(smartphone, tablet, PC) must be located near the
device in which the corresponding receiver is integrated.
icon will be the master when
37
Bild 3