10. DAB
The radio receives all established digital radio frequencies
in the range of 174 MHz to 240 MHz (band III, channel
5A to 13F).
• Enable [MODE] operating mode by repeatedly
pressing DAB.
10.1 Search/ Automatic search
The automatic DAB channel search scans the DAB band
III for available stations. After the station search, all
interference-free stations are saved in alphabetical order.
In Stations list a ? is displayed in front of the station
names of stations found during a previous scan but which
cannot currently be received. The automatic DAB station
search starts automatically when DAB mode is started for
the first time; it is indicated by Scanning... and a status
bar on the display.
If you would like to start the search again, proceed as
follows:
[MENU]
Main menu
DAB
[MENU]
Full scan
20
10.2 Manual station search
With the manual station search function you can search
through individual frequencies and channels. If you know
the frequency of the desired station and the automatic
station search failed to fi nd it, use this feature to set the
reception frequency directly.
Proceed as follows, choosing a frequency range between
5A and 13F:
The Stability bar indicates the current signal strength.
The marking along the bar indicates the value required
for interference-free reception. If this value is not reached
(the bar is empty), then the signal strength is not sufficient
on this channel.
Note
• DAB/ DAB+ permits the transmission of several
stations within a single frequency block. When
sorting by Ensemble the stations are displayed
according to how they are distributed across the
frequency blocks.
[MENU]
Manual tune