Hama DIT1000MBT Operating Instructions Manual page 33

15.2.2 Wireless network connection (WLAN)
Depending on the network, there are a number of ways to
connect to it. Networks that support connection via WPS
(Wi-Fi Protected Setup) are identified in the list as [WPS].
Other connections are either open networks or
connections protected with a PSK, or Pre-Shared-Key.
WPS-/PSK-/ open network connection
WPS allows simple and nevertheless protected connection
of the radio to the network. Two options are available
for this purpose: The connection can be set up by means
of PBC, or Push-Button Confi guration, or by the PIN
procedure, in which the web interface of your router
prompts you to enter a randomly generated sequence of
numbers.
PBC setup
• Select your desired network. (Indicated by the prefix
[WPS]).
• In the WPS menu, choose the Push Button option and
confirm your selection by pressing OK.
• Press the WPS button on your router or current access
point. This can often be done using the web interface,
as well.
• Consult the operating instructions of your router or
access point for details.
• Once the process has been started on the router or
access point, the radio should be able to find and
connect to the network.
Desired network
29
• Alternatively, PBC setup can be initiated from the
internet settings of the radio:
PIN setup
• Select your desired network. (Indicated by the prefix
[WPS])
• In the WPS menu, choose the Pin option and confirm
your selection by pressing [OK].
• The radio generates an 8-digit code, which must be
entered into the web or user interface of your router or
access point.
• Consult the corresponding handbook for details on
configuring the router or access point.
Skip WPS / Pre-Shared Key (PSK) setup
• Choose the item Skip WPS to proceed to key entry.
• In networks that do not support WPS, you will go
directly to key entry.
• In the input screen, enter the whole key and then
confirm with OK.
• If the key was entered correctly, the radio connects
to the access point and establishes the internet/
network connection.
Note
• Often the Pre-Shared Key is printed on the back
or bottom of the router or access point.
• When entering the key, take notice of capitalisation.
[MENU]
System settings

Network

PBC WLAN setup