Drc (Dynamic Range Control); Scan Setting - Hama DIT1000MBT Operating Instructions Manual

10.8 DRC (Dynamic Range Control)

Some radio stations in the DAB network support an audio
level control that is activated at varying volumes during
playback. If the audio level suddenly rises during playback,
DRC automatically reduces the volume. The same happens
if playback suddenly becomes quieter, with the radio
then increasing the volume. This radio has three different
settings for DRC:
DRC high: total equalisation of different volumes.
Strong compression can audibly reduce the dynamics
of a music title.
DRC low: partial equalisation of different volumes. More
subtle compression, without too much loss of dynamics.
DRC off: no equalisation.
Proceed as follows to do the settings:
11. FM
From the main menu or after pressing [MODE] repeatedly,
activate operating mode FM (FM Radio):
Alternatively, press [FM] on the remote control to switch
directly to this operating mode.
Stations that broadcast additional information regarding
the station and the programme, are highlighted on the
display with an RDS icon (Radio Data System).
Additional information were displayed by pressing [INFO].

11.1 Scan setting

The search run setting allows you to determine whether
[MENU]
stations with low signal strength are ignored during the
automatic search run. Proceed as follows:
DRC
• To have the search run stop only at stations with high
23
signal strength, confirm the subsequent query by
selecting YES. Otherwise, the search run will stop at
every station for which a signal is received.
[MENU]
Main menu

FM
[MENU]
Scan setting