Alarms; Alarm Settings; Activating/ Deactivating The Alarm - Hama DIT1000MBT Operating Instructions Manual

14. Alarms

The Radio has two individually adjustable alarm times.

14.1 Alarm settings

• You can access the alarm settings as follows:
• Or:
• Alarm 1 and alarm 2 are confi gured identically. So you
can save two different alarm times. Select alarm 1 or 2
and then make the following settings by means of OK:
Enable:
Choose when the alarm is to activate:
Off – Daily – Once – Weekdays – Weekends
Date and time:
If you selected Once, enter the date and time for
the one-off alarm.
Time:
First choose the hour, then the minute at which the
alarm is to activate.
Mode:
Set whether you wish to be woken by an alarm tone
(Buzz), by DAB, FM or by the Internet radio.
Preset:
If you selected Internet radio/ DAB/ FM, choose which
station or podcast you wish to be woken with. You can
choose any of the 30 favourite station slots or the Last
listened.
[ALARM]
[MENU]
Main menu

Alarms
27
Volume:
You can set the volume at which the alarm sound should
be played. This setting makes it irrelevant how loud you
last listened to the radio.
Save:
Confirm this menu item to complete your alarm settings.
Note
• When using Internet radio for the alarm sound
take care that the internet connection will be
available at the time of the alarm. If no internet
connection is available the radio instead uses the
wake-up buzzer (Buzz).
• It is recommended to allow the radio to update
the time automatically. This ensures that the time
is always correct even if there is a separation of
power supply – for example a power cut.
Note – Alarm/multi-room
• When using and setting the alarm function on a
device that belongs to a multi-room group, please
note that this device automatically leaves the group
at the time of the alarm.
• This behaviour prevents activation of the alarm on all
devices that belong to the group.
• The device in question does not automatically rejoin
the group after the alarm has been stopped, but must
be added manually.

14.2 Activating/ deactivating the alarm

• Confirm the menu item Save in alarm settings to
activate the alarm.
• Disable the alarm by setting the Mode: to Off.