Table of Contents
Advertisement
16.2.2 Procedure for Android users
• Open the UNDOK app on your tablet or smartphone.
• Tap the Set up audio system menu item.
• Make sure that the radio or speaker is in SETUP mode.
Set the product to the factory settings, if necessary.
Confirm the query with Next.
• On the following page, you will find a list of all
available Wi-Fi networks as well as the suggested
audio systems; the Hama product (for example, Setup
Hama DIR3120LED) should be listed here. Tap the
corresponding Wi-Fi network.
• Now choose a name for the radio (for example, Office
DIR3120) and confirm your entry with Next.
• This takes you to the date and time settings – here you
set the time format, time source and time zone.
• The various network configuration options are then
offered to you (where applicable, Wi-Fi, WPS and
Ethernet). Tap the desired method; the UNDOK app
switches to the next window.
• Depending on the selected method, you can now select
and configure the desired Wi-Fi network, set up a WPS
connection or set up the connection using a LAN cable.
• Finally, the radio connects to the network; by tapping
Start using my audio system, you will be able to use the
device in the UNDOK app.
16.3 General control of a device or group
To control a configured device, tap the relevant device/
group in the selection list on the UNDOK home page.
This takes you to the product's playback screen; the
following functions are available:
1
2
3
4
5
36
Bild 2
7
8
9
10
11
Hide quick links:
Advertisement
Table of Contents
