First-Time Setup Of The Device With Undok - Hama DIT1000MBT Operating Instructions Manual

1 Update the audio system list
2 Preview for ungrouped radios
3 Set up new audio system
Icon for managing an existing
4
multi-room group
5 Create a new multi-room group with this device
6 Check for system update for all devices
Further information, such as app info,
7
change app theme, and data logging

16.2 First-time setup of the device with UNDOK

The first time you switch on an UNDOK-enabled product
from Hama, or when you have set it to the factory settings,
it creates a micro access point – a separate Wi-Fi network
that you can connect to with your tablet or smartphone.
16.2.1 Procedure for iOS users
• Open the UNDOK app on your iPhone or iPad.
• Tap the Set up audio system menu item.
• Make sure that the radio or speaker is in SETUP
mode. Set the product to the factory settings, if
necessary. Confirm the query with Next.
• The UNDOK app now prompts you to connect to
the product's Wi-Fi network using the iPhone/iPad
settings – to do so, switch to the system settings
on your iPhone and select the Wi-Fi network (for
example, Setup Hama DIR3120LED). Then return
to the UNDOK app and tap Next.
• Now choose a name for the radio (for example,
Office DIR3120) and confirm your entry with Next.
• This takes you to the date and time settings – here
you set the time format, time source and time zone.
• The various network configuration options are then
offered to you (where applicable, Wi-Fi, WPS and
Ethernet). Tap the desired method; the UNDOK app
switches to the next window.
• Depending on the selected method, you can now select
and configure the desired Wi-Fi network, set up a WPS
connection or set up the connection using a LAN cable.
• Finally, the radio connects to the network; by tapping
Start using my audio system, you will be able to use
the device in the UNDOK app.
35