Cisco 8832 User Manual page 19

On the microphone to be paired, press the Mute button until the white LEDs begin to blink. If
pairing succeeds, a success message appears on the phone screen.
If pairing times out or fails, a message indicating this appears on the phone screen.
(Optional) Press Cancel to revert to the Wireless Microphones menu.
Wireless Expansion Microphone, on page 16
To enable the Unpair option, place the wireless microphone on its charger or turn it off.
Press Settings.
Select Admin Settings > Wireless Microphones.
Select either Wireless Microphone 1 or Wireless Microphone 2.
If the selected channel is paired, the Unpair softkey displays on the phone screen.
Press Unpair.
Wireless Expansion Microphone, on page 16
You can connect two conference phones using a Smart Adapter and a pair of USB-C cables to expand the
audio coverage area in a room. Only one unit needs to be connected to the network.
In daisy chain mode, both units receive power though the Smart Adapter which is connected to a power
adapter. You can use only one microphone per unit. You can use either a pair of wired microphones with the
units or a pair of wireless microphones with the units, but not a mixed combination of the microphones.
When a wired microphone is connected to one of the units, it unpairs any wireless microphones connected
to the same unit. Whenever there is an active call, the LEDs and the menu options on the phone screen of
both units are synchronized.