Cisco 8832 User Manual page 15

Cisco IP Conference Phone 8832 PoE Injector: Use this if the LAN supports Power over Ethernet (PoE).
The phone is plugged into the Cisco IP Conference Phone 8832 PoE Injector, which in turn is plugged
into the network using an Ethernet cable.
Cisco IP Conference Phone 8832 Non-PoE Adapter: Use this if the LAN does not support PoE. The
phone is plugged into the Cisco IP Conference Phone 8832 Non-PoE Adapter, which in turn is
plugged into the network using an Ethernet cable. Then, the adapter is plugged into an electrical
outlet.
Cisco IP Conference Phone 8832 Ethernet Injector: If the LAN does not support PoE and you are
based in North America, you can use this as an alternate non-PoE option. However, if you are based
outside North America, you must use the Cisco IP Conference Phone 8832 Non-PoE Adapter. The
phone is plugged into the Cisco IP Conference Phone 8832 Ethernet Injector, which in turn is plugged
into the network using an Ethernet cable. Then, the injector is plugged into an electrical outlet with a
power adapter.
Draft comment: Design team: This has been added for the Wi-Fi support feature in Volantis Phase 2
release.
Wireless connection The Cisco IP Conference Phone 8832 can connect to a Wireless Access Point
using Wi-Fi.
Draft comment: Design team: This has been added for the MRA support feature in Volantis Phase 2
release.
Mobile and Remote Access Through Expressway If your administrator sets up Mobile and Remote Access
Through Expressway and you connect your phone to the network, it connects to the Expressway server
automatically.
The Cisco IP Conference Phone 8832 can access a Wi-Fi network. You need a power adapter to power the
phone. The Cisco IP Conference Phone 8832NR cannot be used with a Wi-Fi network.
Your administrator needs to configure settings on the call control system to enable Wi-Fi access.