Playworld Systems XX0187 Installation Instructions Manual

Unity large overhead canopy in-ground and surface mount

Advertisement

Quick Links

Installation Instructions
WARNING
!
Attention: Owner
The Overhead Components are designed for hand over hand movement across
the top rungs to foster play activity which combines upper body development,
body control, hand eye coordination, and gripping ability.
Improper play and behavior on the Overhead Component can result in serious
accidents. The following rules for the use of the component must be applied to
reduce the possibility of debilitating injuries:
• Properly trained adult supervision is required at all times. The components are designed
to accommodate children 5 through 12 years of age. Supervisors and parents should
be aware of appropriate age and physical capabilities of the users.
• Do not crawl on, sit on, stand on or jump off the top of the assembly.
• Users must move in same direction across the length of the top of the component
assembly. Always use fi ngers and thumbs for "Lock Grip" on hand rungs. Do not begin
movement across the top hand rungs from opposite ends of the structure.
• Adequate distance, such as half the length of the ladder, must be maintained between
users proceeding across the hand rung assembly.
• Be alert to swinging feet generated by body movement of participants using the
apparatus.
• Do not use when hand rungs are wet as gripping capability is impaired. Use only when
rungs are dry.
Page 1 of 2
SUPERVISION INSTRUCTIONS
PLAYWORLD SYSTEMS
OVERHEAD COMPONENTS
(SEE COMPONENT LISTING BELOW)
• Avoid speed contests or trying to cover too large a distance in one move.
• Drop from hand rungs with knees slightly bent and land on both feet.
• Protective surfacing material must be installed and maintained within the use zone of
the Overhead Component in accordance with ASTM specifi cation F1292 appropriate
for the fall height of the Overhead Component .
• Review and familiarize warning document supplied with each Overhead Component
shipment outlining owner's responsibilities on provided and maintaining required impact
absorbing surfacing material.
As the owner of this playground equipment, you are responsible for
communicating proper usage to those who may play on it.
Playworld Systems accepts NO responsibility for improper use.
Overhead Components include:
• Horizontal Ladders
• Horizontal Hand Over Hand Ladders
• Horizontal Loop Rung Ladders
• Under Catwalk Hand Over Hand
• Under Catwalk Loop Rung Ladder
• Sky Link
• Sky Arch
• Unity Overhead Canopy
®
Model ZZUNWHOH
ZZUNWHOH
PA-833, PA1028
PA-833, PA1028

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the XX0187 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Playworld Systems XX0187

  • Page 1 • Do not crawl on, sit on, stand on or jump off the top of the assembly. communicating proper usage to those who may play on it. Playworld Systems accepts NO responsibility for improper use. • Users must move in same direction across the length of the top of the component assembly.
  • Page 2 Installation Instructions SUPERVISION INSTRUCTIONS Movement Must Be In Same Direction With Do Not Begin Movement From Do Not Use When Hand Rungs Are Wet Adequate Distance Between Users Opposite Directions Overhead Component shown is for example only. May not be the component ordered.
  • Page 3: Installation Instructions

    Installation Instructions Installation Instructions Playworld Systems ® Models XX0187 and XX0187S Unity Large Overhead Canopy In-Ground and Surface Mount Installation Preparation Recommended Crew: ......Three (3) adults Installation Time (In-Ground): ....9.5 man-hours Installation Time (Surface Mount): ..6 man-hours Concrete Required: .......
  • Page 4 Top View Left OH Frame Right OH Frame Post #3 Post w/ no Post #1 number Post #3 Post #1 Post #3 Post #1 Footing Diagram 87.8" (2229 mm) Elevation Views XX0187 Page 2 of 14 Models XX0187 and XX0187S PA1342...
  • Page 5 Top View Post #3 Left OH Post w/ no Post #1 Right OH Frame number Frame Post #3 Post #1 Post #3 Post #1 Footing Diagram 87.8" (2229 mm) Elevation Views XX0187S Page 3 of 14 Models XX0187 and XX0187S PA1342...
  • Page 6 Post w/ No Number APT5248 (32 Total) XX0187S Post #1 APT5242 XX0187S Post #3 APT5244 Detail A XX0187S Post w/ No Number APT5241 Step 4 Attach the cleats to the support posts. Page 4 of 14 Models XX0187 and XX0187S PA1342...
  • Page 7 Overhead End Panel (8 Total) BPM0309 (2 Total) 1/4" Flat Washer BAE0158 (8 Total) 1/4" Button Head Nut BAE0161 (8 Total) Detail B Step 5 Attach the handholds to the overhead end panels. Page 5 of 14 Models XX0187 and XX0187S PA1342...
  • Page 8 Insert a connector into the open ends of the frames. 3/8" x 3/4" Make the connections. Button Head Bolt BAE0659 (10 Total) Detail C Step 6 Attach the overhead frames together. Page 6 of 14 Models XX0187 and XX0187S PA1342...
  • Page 9 Details D-1 and D-2 Attach the overhead frames to the Attach the arch ring frame to the support support posts. Step 7 post with no number. Attach the overhead frames to the support posts. Page 7 of 14 Models XX0187 and XX0187S PA1342...
  • Page 10 (half of a two-piece assembly) BPL0300 (22 Total) 3/8" Flat Washer 3/8" Thin Series Lock Nut BAE0595 BAE0610 (22 Total) (22 Total) Detail E Step 8 Attach the steel panels to the arch ring frame. Page 8 of 14 Models XX0187 and XX0187S PA1342...
  • Page 11 Attach the post topper to the support posts. Plastic Bolt Cap (half of a two-piece assembly) BPL0300 (22 Total) Detail G Step 11 Press the bolt caps into the plastic washers. Page 9 of 14 Models XX0187 and XX0187S PA1342...
  • Page 12 This number will then correspond with the number stamped into mounting plates on the overhead canopy frames. Match the frame to it's corresponding posts. See the Example on the same page. Page 10 of 14 Models XX0187 and XX0187S PA1342...
  • Page 13: Bill Of Materials

    Installation Instructions Bill of Materials XX0187 - UNITY LARGE OVERHEAD CANOPY XX0187S - UNITY LARGE OVERHEAD CANOPY SM PART NO. DESCRIPTION QTY. PART NO. DESCRIPTION QTY. AAU0799 CONNECTOR - 1.375" O.D. x 4.75" THREADED HOLES AAU0799 CONNECTOR - 1.375" O.D. x 4.75" THREADED HOLES AAU6159 RING - 9.50"...
  • Page 14 Installation Instructions This page is intentionally left blank. Page 12 of 14 Models XX0187 and XX0187S PA1342...
  • Page 15: Equipment Maintenance

    ® • Inspect for loose fasteners. • Inspect component to be solid in footing and secure. If Models XX0187 and XX0187S Tightening torque specifi cations are: any damage is detected, barricade equipment to prevent Bolts and Nuts: Snug tighten and tighten an additional use until repair is completed.
  • Page 16: Inspection Checklist

    Inspect footing to insure support is secure and footing is not damaged. Inspector: Name __________________________________ Signature:_________________________________________ Date:___ /___ /___ (Please Print) MAINTENANCE SCHEDULE Item in Question Description of Problem Corrective Action Date Repairer: Name __________________________________ Signature:________________________________________ Date:___ /___ /___ (Please Print) Page 14 of 14 Models XX0187 and XX0187S PA1342...

This manual is also suitable for:

Xx0187s

Table of Contents