Table of Contents
Advertisement
Windows Vista 32/64 Systems
Observe the following steps to install the USB SmartCable on a Windows Vista system.
1. Connect the USB SmartCable to a USB port on the development PC.
2. After the PC detects the new hardware, it will display the Found New Hardware Wiz-
ard dialog box. Click
3. Depending on your development PC's User Account Control settings, Windows may
ask for permission to continue the installation. Click
4. When the Insert the Disc dialog appears, select
other options.
log.
5. Select
For Driver dialog, which prompts you to key in or browse for the location of the
driver's
the
ton.
On 32-bit Vista systems, navigate to:
<ZDS II Installation>\device drivers\USB\x32
On 64-bit Vista systems, navigate to:
<ZDS II Installation>\device drivers\USB\x64
6. When the Windows Security dialog prompts you whether to install or not to install,
click
(Windows may prompt you more than once).
7. When the software has been installed successfully, click
Windows XP-32(SP3) Systems
Observe the following steps to install the USB SmartCable on a Windows XP system.
1. Connect the USB SmartCable to a USB port on the development PC. When the PC
detects the new hardware, it will display the Found New Hardware Wizard dialog.
2. In the Wizard, select
Next
If the Windows Hardware Installation dialog appears, click
Note:
UM028901-0318
Locate and install driver software (recommended)
Click the
Next
Browse my computer for driver software (advanced)
file. Depending on the type of computer you use (32- bit or 64-bit), use
.inf
button to navigate to one of the following paths, then click the
Browse...
Install this driver software anyway
Install from a list or specific location (Advanced)
.
®
Z8F6481 ZMOTION
Continue
I don't have the disc. Show me
button to display the Windows couldn't find driver dia-
and wait until the installation is completed
Continue Anyway
Library Development Kit
User Manual
.
.
to display the Browse
Next
.
Close
, then click
.
Documentation
30
but-
Advertisement
Table of Contents
