Table of Contents
Advertisement
5. With the USB A (male) to Mini-B cable, connect Port P1 on the ZMOTIONL300
Development Board to a USB port on the development PC to apply power and provide
a serial interface for the Development Board. See Figure 15.
Figure 15. Connecting Port P1 to a USB Port on Development PC
6. Open a serial terminal application like CoolTerm or RealTerm and connect to the
Zilog USB Serial Device at 57,600 bps, No Parity, 1 Stop bit. Open
Manager
the Zilog USB Serial Device connected to P1 on the ZMOTIONL300 Development
Board.
UM028901-0318
Z8F6481 ZMOTION
and look under
Ports (COM & LPT)
®
Library Development Kit
to identify the COM port assigned to
Using ZDS-II to Download and Debug a Project
User Manual
20
Device
Advertisement
Table of Contents
