ZiLOG ZMOTION Z8F6481 User Manual page 21

2. Place switch SW4 into the NP position.
3. Connect one end of the 6-circuit ribbon cable provided in your Kit to the USB Smart-
Cable unit, ensuring that the ribbon's male connector is aligned correctly with the
female connector on the unit, as indicated by the red stripe in Figure 13.
UM028901-0318
Figure 12. NP Current Jumper Installed on J9
®
Z8F6481 ZMOTION
Using ZDS-II to Download and Debug a Project
Library Development Kit
User Manual
18