Viotek GN34C User Manual page 4

Indicator Light
This light is located on the front of the monitor.
Solid blue light indicates power is on and the monitor is operating normally.
Flashing blue light indicates no video source has been detected. Please ensure your
PC is on and all video cables are fully inserted and/or connected.
Control Panel
The Control Panel is located at the corner of the monitor. Its labels are on the front
of the monitor while its buttons are directly under the labels on the bottom
edge. The Control Panel is used (1) to turn the monitor on and (2) in combination
with the On-Screen Display (OSD) Menu to adjust the monitor settings. Review the
images below for information about this panel.
Menu/Enter
Menu/Enter: Opens the main menu
Down: Moves down/lower while navigating
Up: Moves up/higher while navigating
Exit: Exits the current menu screen and returns to the main menu,
or closes the menu if currently on the main menu screen
Power: Turns the monitor on or off
Note: The Down and Up buttons may be mapped to keyboard hotkeys if desired.
OSD Menu
The On-Screen Display (OSD) Menu may be used to adjust your monitor's settings
and appears on screen after turning on the monitor and pressing the Control
Panel's Menu/Enter Key.
Note: When using the monitor for the first time, settings will automatically adjust
to optimal settings according to your computer's configuration and parts etc.
Down Up
All specifications and informations are subject to change without notice.
Indicator Light
Exit Power
-3-