Table of Contents
Advertisement
SECTION E:
ERROR MESSAGE
ERROR CODE
E-0
Power interrupted.
E-2
Ignition safety feature is activated.
E-6
Extinguished during operation.
E-8
Blower motor malfunction.
E-12
Overheating safety feature is activated.
Burner thermistor malfunction
E-13
Excess fuel in the burner
E-22
Ignition failure three times
E-23
Primary flame (Flame sensor) is malfunction and / or dirty.
-- : --
Timer is not setting.
Room temperature is higher than 35˚C.
Hi
Position of room temperature sensor is not correct.
Room temperature is lower than -10˚C.
Lo
Room thermistor malfunction or disconnected.
INFORMATION
WHAT TO DO
Re-ignite the heater
Contact your dealer
Contact your dealer
Contact your dealer
Clean the air filter and remove dust.
Contact your dealer
Contact your dealer
Contact your dealer
Contact your dealer.
Set the timer.
Check the position of room temperature
sensor.
Check the position of room temperature
sensor.
10
Advertisement
Table of Contents
