Section A; Specifications; Section A Specifications - Toyotomi OM-22 Type C Installation And Operation Instructions Manual

SECTION A:

SPECIFICATIONS

Model:
Heater Efficiency:
Heat Rating:
Fuel Consumption:
Fuel system:
Fuel Type:
Dimensions (W × H × D):
Weight:
Vent Pipe Hole:
Maximum Length of Vent Pipe System:
Electrical Rating:
Typical Room Size (3):
(1) Heat and vaporized water are produced by the combustion process of this heater. This rating does not
take into account heat loss due to condensation of water vapor.
(2) External tank to be purchased from local suppliers.
(3) 0° F Heat Load = 24 BTU/ft
20° F Heat Load = 20 BTU/ft
Room size for which this heater is suitable will vary depending on outside temperature, house insula-
tion, window size, and other factors.
OM-22
90% (1)
High - 22,000 BTU/h
Med - 15,000 BTU/h
Low -
High - 0.165gal/h
Med - 0.113gal/h
Low - 0.060gal/h
External tank (2)
ASTM D3699 1-K Kerosene, ASTM D396 No.1 or No.2 Fuel Oil
(Smoke Point : more than 15mm)
19-5/8" × 23-5/8" × 16-1/2"
38lbs. Empty
2-3/4" ~ 3" diameter
10ft., 3 bents or less
120 Volts AC, 60 Hz
Preheat - 275W
Burning - 55W
920square feet (0°F)
1150square feet (20°F)
2 /hr
2 /hr
8,000BTU/h
2