Table of Contents
Advertisement
After using the installation template as a guide for the
drilling of the hole for the exhaust pipe, the heater can
be installed normally, according to the procedure in the
illustration.
If the template is lost or the heater has to be moved,
these are the dimensions and locations of the holes for
the fuel pipe and exhaust pipe.
Do not remove any components from the
heater. Always contact your dealer if repairs
are required.
If the electricity cable is damaged, this may
only be replaced with type H05 VV-F and by
a recognised installer.
638
244
202
Contre of the feed-
through component
220
212
Fig. 3 Template
Hole for wall bracket
61
14
Advertisement
Table of Contents
