The Alerts Dialog; External Bridge Alert Systems - Simrad R5000 Operator's Manual

Siren enabled
By default, the audible alert signal is turned ON.
You can select to disable the audible signal when service mode is active, but the audible
signal will be enabled when service mode is deactivated.

The Alerts dialog

The Alerts dialog includes a list of active alerts together with a historic listing of the last alert
state changes. Entries are added to the history whenever an alert is raised, acknowledged,
rectified or cleared.
All alerts in the Alerts dialog include a time stamp.

External bridge alert systems

The system supports Bridge Alert Management (BAM) and Bridge Navigational Watch Alarm
Systems (BNWAS).
Bridge Alert Management (BAM)
All system alerts are transferred to the bridge alert system if this is connected to the system.
An alert generated by the system - e.g. Danger target alarm - can only be acknowledged
from the system itself. Global alarms - e.g. Position timeout or Gyro failure - can be
acknowledged on both the system control unit and on the bridge alert system.
Bridge Navigational Watch Alarm Systems (BNWAS)
If a BNWAS is connected to the system, the system outputs an EVE sentence to the BNWAS
when a user interaction with the system occurs. The EVE sentence remotely resets the
BNWAS timer to confirm wheelhouse crew activity.
63
The alert system | R5000 Operator manual