Standby Mode; Dlp ® Link Tm; Dlp ® Link Tm Invert; Returning To The Default Settings - Sharp Notevision XR-50S Operation Manual

Adjusting the Projector Function ("PRJ-ADJ1/2" Menu)
(Continued)

STANDBY Mode

When set to "Eco", power consumption is
reduced in Standby mode.
Selectable
items
Eco The monitor output and RS-232C are
switched off in Standby mode.
Quick Start The monitor output and RS-232C are
activated even if the projector is in
Standby mode.
®
DLP Link
See the Operation Manual for Stereoscopic
3D Projection provided separately.
®
DLP Link
(XR-55X only)
See the Operation Manual for Stereoscopic
3D Projection provided separately.
Returning to the Default
Settings
This function allows you to initialize the
settings you have made in the projector.
Note
• The following items or menu cannot be
initialized.
- Resolution
- Language
- Lamp Timer (Life)
- System Lock
52
Description
TM
(XR-55X only)
TM
Invert
Menu operation n Page
Checking the Lamp
Life Status
You can confi rm the cumulative lamp usage
time and the remaining lamp life (percentage).
Lamp usage condition
"Life"
Operated exclusively
with "Eco+Quiet"
set to "On"
Operated exclusively
with "Eco+Quiet"
set to "Off"
Note
• It is recommended that the lamp be changed
when the remaining lamp life becomes 5%.
• The lamp life may vary depending on the
usage condition.
Remaining lamp life
100% 5%
Approx. Approx.
4,000 hours 200 hours
Approx. Approx.
2,000 hours 100 hours
39