Stopping Procedure - P1PE P5200MT User Manual

ADJUSTING IDLE SPEED
NOTE
You must only make adjustments after the engine has had time to warm up.
5.19 If the engine stalls when idling, you will need to adjust the idle adjusting screw.
5.20 The idle adjusting screw can be accessed via the back of the air filter housing next to
the choke lever.
5.21 Turn the idle adjusting screw clockwise to increase idle speed.
5.22 Turn the idle adjusting screw anti-clockwise is the cutting head keeps rotating after
releasing the throttle trigger.

7. STOPPING PROCEDURE

CAUTION
Except for an emergency, avoid stopping the engine while pulling the throttle lever.
6.0 Release the throttle lever and allow the engine to idle for 30 seconds.
6.1 Move the stop switch to the STOP position.
6.2 The engine should now stop.
NOTE
If the machine fails to stop at the stop switch, move the choke lever to the closed
position.
(1) Idle Adjusting Screw
21