P1PE P5200MT User Manual page 20

ADJUSTING THE THROTTLE CABLE
NOTE
You must only make adjustments after the engine has had time to warm up.
5.14 The normal amount of play is 1 to 2mm when measured at the carburetor end.
5.15 If the cable requires adjustment, remove the air filter housing to expose the
adjustment screw.
5.16 Loosen the lock nut.
5.17 Wind out the threaded cable adjuster until the desired tension is reached.
5.18 Tighten the lock nut back up securely.
(1) Air Filter Housing
(3) Lock Nut
(2) Threaded Cable Adjuste
20