Table of Contents
Advertisement
Quick Links
Download this manual
See also:
User Manual
Advertisement
Table of Contents
Related Manuals for P1PE P5200EA
Summary of Contents for P1PE P5200EA
- Page 1 FOR YOUR SAFETY You must read and understand this manual before use. Keep this manual for future reference.
-
Page 2: Table Of Contents
INDEX CONTENTS PAGE NO.S SAFETY 3 - 7 PART LOCATIONS QUICK START GUIDE 9 - 10 STARTING PROCEDURE 10 - 11 STOPPING PROCEDURE USING THE MACHINE 12 - 14 MAINTENANCE 15 - 19 STORAGE TROUBLESHOOTING SPECIFICATION DECLARATION OF CONFORMITY RECYCLING & PRODUCT DISPOSAL MANUAL UPDATES WARRANTY CONTACT DETAILS... -
Page 3: Safety
1. SAFETY General Safety Notes. The operator of the machine is responsible for, and has a duty of care in making sure that the machine is operated safely and in accordance with the instructions in this user manual. Keep the manual safe and pass it on if the machine is loaned or sold to another user. - Page 4 1.10 Carbon Monoxide (where applicable). 1.11 Carbon monoxide is a colourless and odourless gas. Inhaling this gas can cause death as well as serious long term health problems such as brain damage. 1.12 The symptoms of carbon monoxide poisoning can include but are not limited to the following;...
- Page 5 1.24 ALWAYS clean up spills promptly using absorbent granules and a lidded bin. 1.25 ALWAYS dispose of waste fuels correctly. 1.30 Fueling/De-fueling (where applicable). CAUTION ALL FUELS ARE FLAMABLE 1.31 ALWAYS fuel and defuel in a well ventilated area outside of buildings. 1.32 ALWAYS wear correct, suitable and fit for purpose Personal Protective Equipment (PPE), suggested items are but not limited to safety gloves, overalls.
- Page 6 1.50 Batteries (where present). 1.51 Batteries present a risk if they become damaged by the possible leaking of electrolyte. This electrolyte is an acid and can cause serious burn injuries. Care should be taken when working on or near them. NOTE the electrolyte may be in a liquid or gel form.
- Page 7 1.71 The operating noise of the machine can damage your hearing. Wear hearing protection such as earplugs or ear defenders to protect your hearing. Long-term and regular users are advised to have hearing checked regularly. Be especially vigilant and cautious when hearing ear protection because your ability to hear alarm warnings will be reduced.
-
Page 8: Part Locations
2. PART LOCATIONS Drive Unit Locking Pin Auger Drill Bit Ø 100mm Choke Lever Auger Drill Bit Ø 150mm Air Filter Housing Auger Drill Bit Ø 200mm Spark Plug Handle Fuel Tank Operating Handle Fuel Filler Cap Throttle Trigger Fuel/Oil Mixing Bottle ON / OFF Switch Tool Kit Drive Shaft... -
Page 9: Quick Start Guide
3. QUICK START GUIDE CAUTION This guide is meant to serve as a quick reference for operating your P1PE Earth Auger. We ALWAYS advise reading the manual in full before operation. CAUTION For OUTDOOR use ONLY. Petrol machinery produces Carbon Monoxide - a poisonous, colourless and odourless gas that can cause serious injury or death. -
Page 10: Starting Procedure
Unscrew the fuel filler cap (1). Carefully add the fuel/2 stroke mixture at a ratio of 40:1 (see section 4.) DO NOT overfill, allow a 25mm gap at the top of the tank. Once full, replace and correctly tighten the fuel filler cap. (1) Fuel Filler Cap 4. -
Page 11: Stopping Procedure
Holding the machine firmly, pull the recoil starter handle (6) slowly until resistance is felt. Then pull the recoil starter handle swiftly until the engine attempts to fire. This machine is fitted with an easy recoil start assembly which allows it to be started with less force and a more gentle pulling action. -
Page 12: Using The Machine
6. USING THE MACHINE WARNING You MUST STOP using the machine if any of the following occur. The engine speed changes with no control. In case of misfire. In case of high vibration. When flames or smoke appear. In rain or stormy weather. CAUTION If you are not familiar with this type of machine you should seek advice and guidance from your dealer. - Page 13 4.10 Keep the engine, exhaust and muffler free of grass, leaves, excessive grease or carbon build up to reduce the chance of a fire hazard. 4.11 NEVER pour or squirt the unit with water or any other liquid. Keep handles dry, clean and free from debris.
- Page 14 4.27 Move the machine at least 3m away from the refuelling point before starting engine. 4.28 ALWAYS check the fuel/oil mixture level of the engine before use. 4.29 Inspect that all nuts and bolts are tight and well connected to ensure the safety and reliability of this machine prior to any operation.
-
Page 15: Maintenance
7. MAINTENANCE WARNING ALWAYS stop the engine and unplug the spark plug cap before doing any repairs or maintenance. NEVER touch the rotating auger bit. Check and maintain fuel levels regularly and maintain the fuel/oil mix to the correct ratio. Frequently check the auger and make sure that all deposits are removed from the auger drill bit. - Page 16 AIR FILTER CAUTION Never let the engine run without the air filter being fitted. A dirty air filter element affects the engine performance, increases fuel consumption and makes it difficult to start. If you notice a loss of engine power, check the air filter. You MUST make sure that the air filter housing is free of dust and debris.
- Page 17 SPARK PLUG WARNING The spark plug MUST be tightened with a torque of 12 – 15Nm otherwise the engine will overheat causing damage. Only complete the following steps after the engine has been turned off and allowed to cool. Carefully remove the spark plug HT lead cap. Unscrew the spark plug using the plug wrench provided.
- Page 18 (1) Fuel Filter GEARBOX 5.22 Use a high temperature gearbox grease. Such as Morris K323 Premium blue grease or equivalent. 5.23 Check the gearbox grease after the first 30 hours of use and fill as required. Thereafter check and top-up after every 25 hours. NOTE 20 grams is sufficient for a full top-up.
-
Page 19: Storage
TRANSPORTING 5.30 Ensure the machine is turned off and the spark plug HT lead cap has been removed. 5.31 Make sure no fuel is allowed to leak during transport. 5.32 Secure the machine so it will not move during transport. 5.33 Always carry the machine by the handles. -
Page 20: Troubleshooting
9. TROUBLESHOOTING NOTE If troubleshooting does not resolve the problem, please contact the dealer. Use only original parts approved by the manufacturer, otherwise a hazard risk arises. Problem Possible Cause Possible Corrective Action Clean or replace the spark Worn, Damaged or Carbon plug. -
Page 21: Specification
10. SPECIFICATION MODEL P5200EA Engine Type Single Cylinder, 2 Stroke Air Cooled 1E43F-B Engine Size cc Fuel Tank Capacity ml Noise Level dB Max Speed rpm 9000 Max Power kW Starting Method Recoil Clutch Type Centrifugal 2 Stroke Semi Synthetic Oil and Unleaded fuel... -
Page 22: Declaration Of Conformity
11. DECLARATIONS OF CONFORMITY Genpower Ltd confirms that these Hyundai products conform to the following CE Directives; 2006/42/EC Machinery Directive 2004/10/EC EMC Directive 2000/14/EC Noise Emissions Device 97/68/EC NRMM Emissions Directive... -
Page 23: Recycling & Product Disposal
12. RECYCLING & PRODUCT DISPOSAL We do not offer a takeback scheme for the recovery of Waste Electrical Electronic Equipment (WEEE) & Batteries. Instead the responsibility to dispose of WEEE and or Batteries is passed onto you by So when it becomes necessary to dispose of your machine you must take it to your local Civic Amenity Site. -
Page 24: Manual Updates
We reserve the right to make any modifications without prior notice wherever necessary. 14. WARRANTY To register your machine for the manufacturer’s warranty, please visit: http://www.p1pe.co.uk/warranty 15. CONTACT DETAILS Postal Address: Genpower Ltd, Isaac Way, London Road, Pembroke Dock, Pembrokeshire SA72 4RW Website: www.p1pe.co.uk... - Page 28 P1PE – Position One Power Equipment Isaac Way, Pembroke Dock, Pembrokeshire, SA724RW www.p1pe.co.uk...