Table of Contents
Advertisement
5. FUEL AND OIL
WARNING
All fuels are flammable and must be handled and stored correctly.
Always ensure there is adequate ventilation when handling fuels.
NOTE
This machine is equipped with a two stroke engine and must always be run using a
mixture of petrol and two stroke oil. It is important to accurately measure the amount
of oil to be mixed to ensure the correct mixture is obtained.
4.0
Mix fresh unleaded petrol with a good quality semi-synthetic 2 stroke engine oil to a
ratio of 40:1.
40 parts Unleaded Petrol
4.1
Clean the area around the fuel cap before removal.
4.2
Position the machine so the fuel cap is facing upwards.
4.3
Fill the fuel tank with the correct 40:1 mix of unleaded petrol and semi-synthetic 2
stroke engine oil.
4.4
DO NOT overfill, leave a 25mm gap at the top of the fuel tank.
CHAIN OIL
4.4
Use a good quality chainsaw chain oil.
4.5
Place the unit on its side and remove the oil filler cap (1).
4.6
Fill with chain oil to the correct level.
4.7
Securely replace the oil filler cap
4.8
Do not over fill the chain oil tank and wipe up spills immediately.
1 litre
2 litres
3 litres
4 litres
5 litres
(1) Oil Filler Cap
1 part Semi-Synthetic 2 Stroke Oil
16
25ml
50ml
75ml
100ml
125ml
Hide quick links:
Advertisement
Table of Contents
