Table of Contents
Advertisement
WARNING
This machine is equipped with a centrifugal clutch, so the cutting attachment will
start to rotate as soon as the engine has started.
When starting, place the machine on flat, clear ground to ensure the cutting head
does not come in to contact with any obstacles.
5.7
Once the engine has attempted to fire, move the choke lever downwards to open the
choke and restart the engine.
5.8
If the engine does not start under full choke, move the choke lever down to the open
position.
5.9
Pull the recoil starting handle swiftly until the engine runs.
5.10
Allow the engine to warm up for several minutes before operation.
FROM WARM
5.11
Place the unit on flat level ground.
Move the stop switch to the Run/Start position.
Set the throttle trigger to the start position.
Pull the throttle lever back and push.
Keep the cutting head clear of everything around it.
5.12
While holding the unit firmly, pull the starter rope gently until you feel resistance, then
pull swiftly until the engine fires.
19
Hide quick links:
Advertisement
Table of Contents
