P1PE P5200MT User Manual page 13

INSTALLING THE GRASS TRIMMER
3.20 Insert the allen key provided (1) into the gear case locking hole to prevent the shaft
from rotating.
3.21 Screw the nylon spool (2) onto the shaft thread if the spool is threaded.
If the spool does not have a threaded centre hole, use the nylon nut and tighten
securely (you will have to remove the spool from spool housing).
3.22 Check the spool is secured tightly.
(2) Gear Case Locking Hole
(1) Allen Key
INSTALLING THE HEDGE TRIMMER
3.23 Insert the end of the hedge trimmer mechanism (1) into the end of the main shaft (2).
3.24 Line up the hole on the end of the main shaft (3) with the hole in the end of the
hedge trimmer mechanism (4).
3.25 With both holes lined up, insert the fixing screw (5) and tighten securely.
(3) Shaft Hole
(4) Trimmer Hole
(5) Fixing Screw
(2) Main Shaft
(1) Trimmer Mechanism
13