Unmounting - Bosch AMC2 Installation Manual

14 en | Installing
4.2

Unmounting

Notice!
To remove the AMC2-4R4 from a mounting rail, first remove all pluggable connectors.
Push down the AMC2-4R4 until the lower edge snaps out of the mounting rail [1]. Pull the
lower end of the AMC2-4R4 from the mounting rail [2].
Figure 4.2: Unmounting the AMC2 from a mounting rail
2018-02 | AMC2-4R4 | Installation Manual
AMC2 Modular Controller
Bosch Access Systems GmbH