Domestic Hot Water Tank - DeDietrich HPI G Hybrid User Manual

Measure­ Unit
ment type
R410A re­ tCO e
2
frigerant
(3)
Refrigerant inch
connection
(Liquid -
Gas)
Max. pre- m
charged
length
(1) Noise radiated by the envelope - Test run in accordance with the NF EN 12102 standard, temperature conditions: air 7°C, water 55°C
(2) Noise radiated by the envelope - Test run in accordance with the NF EN 12102 standard, temperature conditions: air 7 °C, water 45 °C
for AWHP 4.5 MR only (inner and outer sides).
(3) Quantity of refrigerant calculated in tonnes of CO
Tab.8 Technical specifications primary circuit (heating water)
Specification
Maximum operating temperature
Version with hydraulic back-up
Minimum operating temperature
Maximum operating pressure
Exchanger capacity
Exchange surface
Tab.9 Technical specifications secondary circuit (domestic water)
Specification
Maximum operating temperature
Minimum operating temperature
Maximum operating pressure
Water capacity
Tab.10 Common specifications (in accordance with the PR-EN 13203–5 standard)
(1)
Loading time
Coefficient of performance
domestic hot water
(COP )
DHW
(1) Water temperature set point: 57 °C – Outdoor temperature: 7°C – Inside air temperature: 20°C
7613348 - v06 - 10122018
AWHP 4.5 AWHP 6
MR MR-3
2.714 2.923
1/4 - 1/2 1/4 - 1/2
7 10
equivalent
2
3.2.2
AWHP 4.5 MR AWHP 6 MR-3
1 hour 21 minutes 1 hour 21 minutes 1 hour 21 minutes 1 hour 33 minutes 1 hour 11 minutes
0.75 0.75
AWHP 8 AWHP 11
MR-2 MR-2
6.680 9.603
3/8 - 5/8 3/8 - 5/8
10 10
Important
The values in tonnes of CO
following formula: quantity (in kg) of refrigerant fluid x GWP /
1000.
The Global-Warming Potential (GWP) of R410A gas is 2088.

Domestic hot water tank

Unit
°C
°C
MPa (bar)
Litres
m²
Unit
°C
°C
MPa (bar)
Litres
AWHP 8 MR-2
0.75
3 Technical specifications
AWHP 11 AWHP 16
TR-2 MR-2
9.603 9.603
3/8 - 5/8 3/8 - 5/8
10 10
equivalent are calculated using the
2
Value
90
7
0.3 (3.0)
11.3
1.7
Value
80
10
1.0 (10.0)
177
AWHP 11 MR-2 , AWHP 16 MR-2 ,
AWHP 11 TR-2 AWHP 16 TR-2
1.07 1.07
200 ASL HYBRID
AWHP 16
TR-2
9.603
3/8 - 5/8
10
19