Hood Control Settings - Siemens EZ9**KZ series Instruction Manual

Hood control settings

H o o d c o n t r o l s e t t i n g s
You can adapt the hood controls on the hob to suit your
needs at any time.
Note:
The settings will only be displayed if the appliance is
connected to an extractor hood.
Ajustes
Fan control
Fan run-on
Automatic light on
Automatic light off
Disconnect
*Factory settings
--------
Descripción y opciones
If you wish, you can set the fan to start up after the hob is switched on, and you can configure the settings
depending on how you want the fan to run.
Switched off: You will need to switch the hood on manually when needed.
■
Switched on in automatic mode*: The hood switches on when setting an independent hob in auto-
■
matic mode.
Switch on in standard fan run-on*: The hood switches on when setting an independent hob to a fixed
■
setting.
The fan continues running to ensure that residual odours are eliminated. The fan will switch off automati-
cally afterwards.
Off
■
Switch on in automatic mode.*
■
Switch on in standard fan run-on.
■
No change: The fan settings will not change if you switch off the hob.
■
If you wish, you can set the hood light to automatically come on when the hob is switched on.
On* – The light switches on when you switch on the hob.
■
Off
■
You can specify whether you want the hood lighting to be switched off automatically when you switch off
the hob.
Deactivated*
■
Activated: The lighting switches off when the hob is switched off.
■
You can delete the connections to your home network and extractor hood that you have saved at any time.
Hood control
en
43