Automatic Time Limit; Basic Settings; Changing The Basic Settings - Siemens ET6..EE Series Instruction Manual

Table of Contents

Advertisement

Automatic time limit

If a hotplate is in use for a long time without the setting being
changed, the automatic time limit is activated.
The hotplate stops heating.
hotplate indicator.

Basic settings

Your appliance has various basic settings. You can adapt these
settings to your needs.
Indicator
Function
Automatic childproof lock
™‚
Switched off.*
Switched on.
Activation of the filament circuits
™ˆ
Switched off.
Switched on.
Last setting before the hotplate was switched off.*
ƒ
™‹
Reset to basic setting
Switched off.
Switched on.
*Basic setting

Changing the basic settings

The hob must be switched off.
Switch on the hob.
1.
Within the next 10 seconds, touch the
2.
seconds
and
flash alternately in the left-hand display;
the right-hand display.
Touch the
symbol repeatedly until the desired indicator
@
3.
appears in the left-hand display.
8
and
flash alternately in the
"
symbol for 4
@
lights up in
The display goes out when you touch any control. You can
make new settings.
When the time limit is activated depends on the heat setting
selected (1 to 10 hours).
Touch the + symbol repeatedly until the desired setting
4.
appears in the display.
Touch the
@
5.
©
The setting is activated.
Switching off
To exit the basic setting, switch off the hob with the main switch
and make new settings.
symbol for 4 seconds.
©

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Et6..en seriesEt6..ef series

Table of Contents