Table of Contents
Advertisement
Maximum power consumption
en
hMaximum power
consumption
Y ou can use the Maximum power consumption
M a x i m u m p o w e r c o n s u m p t i o n
function to set the total power of the hob.
The hob settings are preconfigured at the factory. Its
maximum performance is specified on the rating plate.
You can use the power manager function to change the
value to meet the requirements of the specific electrical
installation.
To ensure that this set value is not exceeded, the hob
has a series of components that intelligently and
automatically share the available power between the
cooking zones that are switched on.
While the Maximum power consumption function is
activated, the output of a cooking zone may temporarily
fall below the nominal value. If a cooking zone is
switched on and maximum power has been reached, a
corresponding message appears in the display. The
appliance controls and selects the highest power level
automatically.
For more information about how the total power of the
hob is changed, see the section entitled ~ "Basic
settings"
44
DCleaning
S uitable maintenance and cleaning products can be
C l e a n i n g
purchased from the after-sales service or in our e-Shop.
Hob
Cleaning
Always clean the hob after cooking. This will prevent
food deposits from becoming burned on. Only clean the
hob after the residual heat indicator has gone out.
Clean the hob with a damp dish cloth and dry it with a
cloth or towel to prevent limescale build-up.
Only use cleaning agents that are suitable for this type
of hob. Observe the manufacturer's instructions on the
product packaging.
Never use:
Undiluted washing-up liquid
■
Cleaning agents designed for dishwashers
■
Abrasive cleaners
■
Harsh cleaning agents, such as oven spray and
■
limescale remover
Scouring pads
■
High-pressure cleaners or steam jet cleaners
■
Stubborn dirt is best removed with a glass scraper,
available from retailers. Observe the manufacturer's
instructions.
You can obtain a suitable glass scraper from customer
services or through our online shop.
Using a special sponge for cleaning glass-ceramic
hobs achieves a great cleaning result.
Potential marks
Limescale and water
Clean the hob as soon as it has cooled down.
marks
You can use a cleaning agent suitable for
glass-ceramic hobs.*
Sugar, rice starch or
Clean immediately. Use a glass scraper. Cau-
plastic
tion: Risk of burns.*
* Then clean with a damp dish cloth and dry with a cloth or towel.
Do not use any cleaning agents while the hob is
Note:
still hot. This may mark the surface. Make sure that any
residue left by cleaning agents is removed.
Hob surround
To prevent damage to the hob surround, observe the
following instructions:
Only use warm soapy water
■
Wash new dish cloths thoroughly before use.
■
Do not use harsh or abrasive cleaning agents.
■
Do not use a glass scraper or sharp objects.
■
Advertisement
Table of Contents
