Table of Contents
Advertisement
Disconnecting from the network
D i s c o n n e c t i n g f r o m t h e n e t w o r k
You can disconnect your hob from the network at any
time.
Note:
If your hob is disconnected from the network, it is not
possible to operate it using Home Connect.
Touch the
symbol in the docking menu to open
®
1.
the basic settings.
Touch the "Home Connect" setting.
2.
Touch Disconnect from the network.
3.
Touch "Next" to confirm.
4.
This disconnects the appliance from your home
network; the
symbol will go out on the control panel.
D
Note:
The network connection will also be deleted if you
restore the factory settings on your appliance.
Connecting to the network
C o n n e c t i n g t o t h e n e t w o r k
Touch the
symbol in the docking menu to open
®
1.
the basic settings.
Touch the "Home Connect" setting.
2.
Touch "Use wizard to configure settings" to launch
3.
the Home Connect assistant.
Follow the instructions as per ~ "Automatic
4.
registration in the home network" or ~ "Manual
registration in the home network".
Connect to the app
If the Home Connect app is installed on your mobile
device, you can connect it to your hob.
Notes
The appliance must be connected to the network.
■
The app must be open and be set up.
■
If your extractor hood is directly connected, first
■
disconnect the hob from your home network and
then initiate the connection process
again.~ "Disconnecting from the network"
on page 39~ "Connecting to the network"
on page 39
Touch the
symbol in the docking menu to open
®
1.
the basic settings.
Touch the "Home Connect" setting.
2.
Select Connect to app.
3.
You can also connect a second Home Connect account
to the hob. To do this, select Connect to app again.
Follow the instructions in the app to complete the
4.
connection process.
Settings via app
The Home Connect app provides easy access to the
basic settings and enables you to send the settings for
the cooking zones to the hob.
Notes
The hob must be switched on, but all cooking zones
■
must be switched off.
Operating the appliance directly from the appliance
■
always takes priority. If you operate the appliance
directly, you can operate it via the Home Connect
app.
The appliance is delivered with settings transfer
■
option activated.
If the settings transfer option is deactivated, only the
■
hob's operating status will be displayed in the Home
Connect app.
Touch the
symbol in the docking menu to open
®
1.
the basic settings.
Touch the "Home Connect" setting.
2.
Select Setting via app.
3.
To activate the settings transmission option, touch
4.
On; to deactivate the settings transmission option,
touch Off.
Home Connect
en
39
Advertisement
Table of Contents
