Correction Values; Entering The Correction Values - Gema MultiStar CG10 Operating Instructions And Spare Parts List

Correction values

MultiStar CG10
Rev. 00 08/17
The Gun control unit can be adapted with the correction values optimally
to local conditions (e.g. the adjustment of different powder outputs in the
plant).

Entering the correction values

1. Hold key down for 5 seconds
The display switches to the following level:
2. Press the key
The display switches to the following level:
3. The correction factor number is shown in the display A1 with a C
placed in front
4. Set the corresponding correction value with the T3 or T4 key.
The value of the adjusted correction factor appears on
corresponding display A2
Operation  41