MTU 12V4000G34F Operating Instructions Manual page 66

Engine protection and safety features
• Restricting engine operation to remain within admissible operating values
• Engine protection with dual-level safety systems;
The following responses by the governor including the output of an alarm message can be programmed:
– Start interlock
– Controlled torque reduction
– Torque limitation to an absolute value
– Torque limitation by deduction of a relative value
– Engine shutdown
• Safety engine shutdown (stop or emergency stop) in the event of limit violations and sensor defects, pro-
grammable
• ECMS (Engine Side Condition Management System)
Automatic engine power reduction as a function of e.g.:
– Intake air temperature
– Operating site (e.g. altitude above sea level)
Engine monitoring for genset applications
• Engine speed
• Oil pressure
• Coolant temperature
• Intercooler coolant temperature
• Coolant level
• Intercooler coolant level
• Oil temperature
• Fuel pressure after filter
Additional components
SmartConnect
Upload and download of specific data and parameters
The following diagnostics data is generated:
• Mini display for showing fault codes
• Engine identification data (engine number, serial number,...)
• Control unit identification (serial number, part number, configuration status, CCS, ...)
• Software version identification (application, firmware, CCS, ...)
• Data logger for remote maintenance
Benefits
• Simple handling
• No MTU Service personnel required
EIL (Engine Ident Label)
• Identification of engine hardware
• Data storage, e.g. aging data
66 | Functional Description | MS15060/01E 2018-12