MTU 12V4000G34F Operating Instructions Manual page 107

1056 – AL Inj. Drift Limit 2 Cyl. A5
Cause
The drift correction for
energization (start and duration)
of injector A5 has violated limit 2.
The injector has reached its
maximum drift limit.
1057 – AL Inj. Drift Limit 2 Cyl. A6
Cause
The drift correction for
energization (start and duration)
of injector A6 has violated limit 2.
The injector has reached its
maximum drift limit.
1058 – AL Inj. Drift Limit 2 Cyl. A7
Cause
The drift correction for
energization (start and duration)
of injector A7 has violated limit 2.
The injector has reached its
maximum drift limit.
1059 – AL Inj. Drift Limit 2 Cyl. A8
Cause
The drift correction for
energization (start and duration)
of injector A8 has violated limit 2.
The injector has reached its
maximum drift limit.
1060 – AL Inj. Drift Limit 2 Cyl. A9
Cause
The drift correction for
energization (start and duration)
of injector A9 has violated limit 2.
The injector has soon reached its
maximum drift limit.
1061 – AL Inj. Drift Limit 2 Cyl. A10
Cause
The drift correction for
energization (start and duration)
of injector A10 has violated limit
2. The injector has soon reached
its maximum drift limit.
Corrective action
u Replace injector (→ Page 134).
Corrective action
u Replace injector (→ Page 134).
Corrective action
u Replace injector (→ Page 134).
Corrective action
u Replace injector (→ Page 134).
Corrective action
u Replace injector (→ Page 134).
Corrective action
u Replace injector (→ Page 134).
MS15060/01E 2018-12 | Troubleshooting | 107