MTU 12V4000G34F Operating Instructions Manual page 140

5. Fit cable connector on injector.
Reset CDC parameters after installing new injectors
Note: If the drift correction (CDC) is not reset, the emission certification becomes invalid.
u
Reset drift compensation (CDC) using DiaSys® and enter injector code (IIG) (→ Dialog system DiaSys®
E531920/..). If DiaSys® is not available, contact Service.
Final steps
1. Install cylinder head cover (→ Page 130).
2. Open fuel supply to engine.
140 | Injector | MS15060/01E 2018-12