Installing guard plates and en-
gine mounting brackets (if appli-
cable) on driving end (KS)
Note:
Always use the screws supplied with the equipment or removed from the guard plates and engine supports
to secure them on the engine.
u
Install engine supports (2) on both sides with guard plates (1) washers (3) and screws (4) and tighten to
specified tightening torque tightening.
Name
Screw
24 | Transport | MS15060/01E 2018-12
Size
Type
M16
Tightening torque
Lubricant
Value/Standard
(Engine oil)
250 Nm +25 Nm