MTU 12V4000G34F Operating Instructions Manual page 211

7. Drain remaining coolant at intercooler (ar-
rowed).
8. Use a torque wrench to tighten drain valve on charge-air coolant pump to specified tightening torque.
Name
Spindle
9. Screw in drain screws on thermostat housing and intercooler with new sealing rings.
10. Position valve cover on filler neck at coolant expansion tank and close.
Size Type
A/F11 Tightening torque
MS15060/01E 2018-12 | Low-Temperature Circuit | 211
Lubricant Value/Standard
12 Nm