Table of Contents
Advertisement
■ Grease supplement to the face plate section
❹
❶
❷
❻
❼
❽
■ Adding grease onto the eccentric cam section
❶
❷
❸
❺
❷
❸
❹
❺
– 95 –
1)
Open the face plate cover.
2)
Add the JUKI Grease A onto the felt sections
(3 locations), peripheral shoulder screw, ful-
crums ❶ to ❼ and guide groove section ❽ .
Open crank rod cover ❶ .
1)
2)
Remove setscrew
grease inlet cover located at pe-
❻
riphery of crank rod ❷ .
❹
Fill coupling ❹ with grease through
3)
JUKI Grease A tube ❺ .
Sink screw ❻ supplied with the unit
4)
into the coupling to add the grease.
5)
After adding the grease, securely
tighten setscrew ❸ which has been
removed.
The eccentric cam section
can be sufficiently filled
with grease by adding the
grease while turning the
main shaft of sewing ma-
chine.
❸ from the
Hide quick links:
Advertisement
Table of Contents
